Update system firmware or reset to factory defaults.
How to Update the Firmware
1. Attach a compatible SD card to your computer or a card reader attached to your computer.
SD CARD CONSIDERATIONS
- Your SD card must be 16 GB or smaller
- Formatted as FAT or FAT32 for Windows, MS-DOS (FAT) for macOS (if partitioned, select the MBR Master Boot Record option under Scheme)
2. Visit smallhd.com/pages/software and download the latest firmware.
3. Click the .zip download file to extract the .bin (firmware file), then drag and drop the .bin file onto your SD card.
4. Remove SD Card, insert it into your SmallHD monitor, then turn on the monitor.
5. Swipe/toggle left, or tap the screen to access the monitor’s Settings Menu.
6. Scroll down and tap the FIRMWARE tab.
7. Tap the available firmware.
8. Tap the START UPDATE tab to begin the update process.
9. Once the firmware is installed, you will be prompted to reboot your monitor. Hold the power button for at least 5 seconds, then release it.
10. Press the power button again to begin operating your SmallHD monitor with the new firmware installed.
CAUTION: Make sure you do not lose power during firmware update