Options related to customizing the user interface for your shooting style.
Create customizable function buttons with pre-built layouts to quickly enable and disable tools.
Access customizable User Buttons via the Settings menu on any SmallHD touchscreen monitor by navigating to Settings > User Buttons.
You can adjust how the touch buttons are displayed via Monitor Settings > Interface > User Buttons. There are ON/OFF toggles to enable the buttons, allowing them to be always present and showing function names. User Buttons have a 3-button and 6-button layout option.
There are two ways to assign a Tool to a User Button.
- Scroll down and tap the EDIT button in the Button Assignment submenu.
- Swipe left on any page, then press and hold a User Button to display the list of configurations.
The left column of the configuration page allows users to select which User Button to customize. Shortcuts, Tools, and other Configurations can be assigned to a user button by selecting the desired option from any category. Enabling a tool with a User Button makes that tool a Global or Shared tool. This means that the tool is active on every page of the monitor.
Notable configurations for Touch Function Buttons include Backlight Toggle, Backlight Custom, Input Select, and 4K TX Switch. Having different inputs on Touch Function Buttons allows the user to quickly switch sources, without having to navigate to the Monitor Settings menu.
This option determines the desired zoom level for the second ‘stage’ of pixel zoom, by pressing up twice on the joystick (swiping on touchscreen) when viewing a shot.
Only available on SmallHD Production Monitors and UltraBright Monitors
These settings determine which scopes are displayed when the Scopes Button is activated on the front face of SmallHD’s production monitors.
These settings adjust the functionality of Pixel Zoom which enables you to zoom in on your image at any time when viewing your shot (move up on joystick or swipe up on touch screens)
The Status Display is a discreet information bar at the top or bottom of the image for displaying signal format, frame rate, time and battery life (if applicable).
UI Lock is like a ‘hold’ switch which disables user input while active. This is useful in scenarios where there is a risk of the monitor's controls getting bumped.
UI Lock was added to touchscreen monitors in firmware 3.5.0. Once enabled in the Settings menu, pressing a finger on the screen for 2½ seconds will lock the screen. Pressing the screen again for 2½ seconds will unlock the screen.
Enables or disables the UI lock at any time via a press-and-hold on the joystick or touchscreen for 5 seconds.
When you touch the screen or hold the joystick down, you will see a progress bar appear at the top of the screen and then it will say locked. There will be no other indication that the screen is locked.
To unlock, again, hold for 5 seconds and the word Unlocked will appear.