Settings that affect the output of the display can be found here such as backlight adjustment & auto calibration.
Individual options dependent on monitor model.
Set up and fine-tune the brightness of the LED backlight.
This option enables adjustment of the backlight up to its maximum limit within the specified color space.
If you are in a studio or other low-light environment, use this option to limit the backlight to 100 nits which enables a fine-tune adjustment within that range.
Adjusts the actual output of the backlight or in the case of OLED adjusts the maximum pixel brightness.
Your monitor ships calibrated from the factory with selectable calibration LUTs depending on how you may want to display your image, for example DCI color space for cinema projection or Rec. 2020 for HDR production. Auto-calibration can be performed here to account for long-term color drift by using a compatible calibration puck. This will automatically set the gamma and white point to ensure your monitor is perfectly displaying its intended color space.
Enable Calibration LUT
Once auto-calibration has taken place, toggle this for a before/after comparison of the results.
If you already have a saved calibration LUT you wish to use, you can browse your SD card and apply it here. Otherwise this will display stats related to your auto-calibration.
Targeted Color Space:
(not editable) Lists the color space that your monitor is currently displaying post-calibration.
Targeted White Point:
(not editable) Lists the white point that your monitor is currently displaying post-calibration.
Reset Calibration LUT
Reverts to the factory calibration LUT that is shipped with the monitor.
Automatically sets the white point and gamma of your monitor by using a compatible color calibration probe.
This menu allows you to directly alter the display's RGB output post-calibration if adjustments need to be made to match a lesser monitor on set.
This menu directly affects (and can therefore negate) the extensive calibration capability of the monitor - modify at your own risk.
Adjusts the gamma curve being applied to the final output.
Adjusts the intensity of edge detection. See Peaking for a more user-friendly version of this.
Contrast, Brightness, Saturation (Con,Brt,Sat)
Standard Contrast, Brightness and Saturation controls.
Red, Green, Blue Gain (RGB Gain)
Adjusts the Gain or Contrast of the Red, Green and Blue channels individually.
Red, Green, Blue Offset (RGB Offset)
Adjusts the amount of offset for Red, Green and Blue color channels.