Configure the monitor's network interface and encryption option to enable certain features.
Wi-Fi Network (If applicable)
1. Enable WiFi by flipping the WiFi toggle switch, then tap the Connect button.
2. Select an available WiFi network, then tap Connect to enter your credentials. Tap Connect again.
3. Once a connection is established, the Network page will indicate that the monitor is CONNECTED. Tap Edit To configure the WiFi Connection.
Ethernet ConnectionÂ
- Connect an Ethernet cable to the monitor.
2. Tap the Edit tab to open the Ethernet settings.
3. Select one of two assignments:
- Automatic (DHCP): When set to DHCP, the monitor requests an IP address and configuration from the network’s DHCP server.
- Manual (Static): When set to Static, you must manually configure the IP address, subnet mask, router, and DNS server to connect to the network.
