TABLE OF CONTENTS
To activate your monitor's warranty, please go to https://activate.smallhd.com/. You will need the serial number, which is located on the sticker where the battery goes (you may need to remove your battery to see it). You will also want to have a copy of your invoice from your purchase to confirm the purchase date.
A: 2-pin Locking Power Input
D: L-Series Battery Slot
G: Headphone Jack
B: 5-pin Locking USB
(Camera Control Port)
E: Battery Release Button
H: Power Button
C: 3G-SDI Input
F: SD Card Slot
I: ¼"-20 mounting point
POWER AND CONNECT
- Connect power to the monitor using an L-Series style battery or an alternative power source (Gold/V-Mount battery) via 2-pin Locking Power Cable.
- Press the power button.
- Video signals via SDI up to 1080p60
¼"-20 MOUNTING POINTS
There are three ¼"-20 mounting points to secure the monitor to a camera or rig (left side, right side, bottom, rear).
PAGEOS 4 OVERVIEW
The PageOS 4 interface allows users to configure and assign specific image analyzing tools and/ or features to up to eight customizable pages. Users can access those tools by navigating to the corresponding page on the monitor, instead of enabling or disabling features individually.
The ‘Pages View’ offers a zoomed-out perspective of all configured pages, allowing organization and naming to ensure the most efficient overall setup.
Adjust a wide range of global monitor settings.
PageOS has an easy to navigate touch screen that works just like your smartphone.
- Pinch to zoom
- Swipe left and right between custom pages
- Slide you finger down for a view of all your preset pages
- Swipe all the way left to access your deep settings menu (Calibration, Profiles, etc)
Adding New Pages
To create a new page from either a fresh workspace, a template, or a specific utility, navigate to the right-hand side of the Pages View.
Add New Tool to a Page
Tap your screen while on any page to reveal the toolbar. Press the plus sign that appears on the left side of the page. Select the tool you want added to that page.
Tap your screen while on any page to reveal the toolbar. Then select the tool you want to activate. To adjust the custom settings of that tool press the arrow that appears next to the name of the tool.
Select an input to display its image -- configure a source to unlock log conversions into HDR and SDR color spaces.
Follow the Wizard instructions to assign and configure color space and curve transformations, to enable HDR and SDR from incoming log-based sources.
Select a backlight level that suits your viewing environment to maximize contrast and viewability.
Calibration ensures chrominance and luminance accuracy that can be relied upon for critical color decisions.
Apply sharpening to the video data, if desired
Adjust the audio output level for the headphone jack and/or monitor speaker.
Image Rotate options enable upside-down mounting - or enable Mirroring for when the monitor must face the subject.
These options control how interlaced footage is displayed.
Configure the Image Capture tool to help facilitate shot matching or for automatic thumbnail creation upon pressing Record. (Note: SD card must be inserted into the monitor to perform an image capture).
Browse the Image Gallery to review the images on your removable media.
Configure the default zoom levels for Pixel Zoom to ‘punch in’ to a desired amount when spot checking a particular shot.
Enable and configure the Status Display to get info on various monitoring-related data such as battery life and frames per second.
Once enabled, pressing and holding on the touchscreen for five seconds will lock the UI. Repeating the process will unlock the UI.
Change the language of the internal menu system.
Enable a customizable backdrop for when the monitor is not displaying a signal.
Set a custom name for your monitor, to make it more easily recognizable.
Setting the correct Date & Time will ensure that captured images get an accurate timestamp.
Power-related options such as auto recovery.
Save or load the entire monitor’s configuration to an SD card, great for keeping consistent settings across several monitors.
Firmware can be updated by inserting an SD card with a compatible update file.
Reset the monitor settings to its original factory settings, with the option to clear registration and calibration.
Follow the on-screen prompts to install your purchased license keys (example: Control for KOMODO).