Once you get your monitor plugged in via HDMI or SDI, this is a quick overview of the touchscreen interface. There are more detailed sections in the guide that expands on many of these features, this is a quick overview to get you rolling.
A tutorial is built into the monitor itself under Settings > Help which will run you through the basics via on-screen prompts. This written guide can be followed separately if you don't have a monitor in your hands to train with.
Navigation & Interface
To Navigate, simple use of the joystick nob to move :
Left or Right - to change Pages
Down - Enter Pages mode
UP - Zoom or Exit Pages mode
Click (press in, toward the back of the panel) - select and open TOOL bar
Back button (<) - click to close or navigate back/ exit. (on some models, the Back Button is also the power button, used by Holding for 3+ seconds).
Function (F#) buttons can be programmed as shortcuts.
Pixel Zoom
To zoom into any page for quick spot checks, press up on the joystick.
To pan when zoomed in, click the joystick.
If you wish to adjust the maximum zoom level go to Settings > Interface > Pixel Zoom
Select an Input
To start, ensure you have an input being displayed on your monitor by visiting the Settings page.
To select the monitor's input press the joystick left until you reach the Monitor Settings page. Navigate with the joystick to the (1) Input section and click to go 'into' the input menu. From here (2) select HDMI or HD-SDI depending on which signal you wish to display.
Press the Back button once to access the rest of the settings menu, and press it once more to get to a zoomed-out view of all the monitor's 'Pages'
Utility Pages
- The SETTINGS page displays all the monitor's attributes and preferences, allowing you to manage settings that apply to the entire monitor.
- The DASHBOARD page allows quick access to the most common settings
- The OUTPUT PREVIEW page will enable you to customize the downstream video feed being sent through the output ports of the monitor (Production Monitors only).
- The CONTROL page allows for camera control (on applicable monitors, with appropriate license- sold separately).
- The MULTI-VIEW page lets you view multiple video feeds simultaneously and apply individual tools to each feed (Production Monitors only).
While still zoomed-out, scroll all the way to the right and click the joystick (or press upward) when the '+' is selected. This will add a brand new page that you can customize however you wish to accomplish a range of on-set tasks. You can create a maximum of 8 pages.
The entire monitor is based on the concept of customizablePages- instead of having to enable and disable features individually when needing to change a setup, create pages with a task in mind, for example setting exposure, and quickly joystick (switch) between each page on-set for a highly efficient workflow.
Using TOOLs
Click the joystick to bring up the 'add new tool' menu.
Tools can apply to a single page or all pages.
You can have up to 8 tools in use on a page at the same time (this includes the Global tools).
To Delete a tool, select it, and touch the trashcan icon on the bottom. It will ask you to confirm you want to delete it and selecting it again will remove the tool form your toolbar.
